carbon steel tube
"
ERW 鋼管 ASTM A214 熱交換器用炭素鋼管
ERW Steel Pipe ASTM A214 ERW Carbon Steel Tube For Heat Exchanger Product Description Standard ASTM A214 O.D. 6 - 76.2 mm W.T. 1 - 20 mm Length Max 12000 mm Application Condenser, Boiler, Heat Exchanger and etc. Surface Finish Oiled Chemical Composition: Carbon,max,% 0.18 Manganese,% 0.27-0.63 ...
低温サービスのための継ぎ目が無い溶接されたJIS G3460の炭素鋼の管
JIS G3460 Seamless and welded carbon steel tube for low temperature service JIS G3460 Carbon Steel Pipes for Low-temperature Piping specifies the steel pipes used for piping at exceptionally low temperatures of freezing point or under. Applications: For low temperature service Technique: ERW, Cold...
シリンダ バレルのための継ぎ目が無く、溶接されたJIS G3473の炭素鋼の管
JIS G3473 Seamless and welded carbon steel tube for cylinder barrels Type: Seamless and welded carbon steel pipes Application: For cylinder barrels Technique: Cold-finished, hot-finished, ERW Product Description Grade and Designation The tubes shall be classified into 7 grades, and their designation...
ASTM A556 Gr A2 Gr B2 Gr C2のボイラーのための継ぎ目が無い炭素鋼の管
ASTM A 556 Gr A2 Gr B2 Gr C2Seamless Carbon Steel Tube for Boiler Size : from 5/8 to 1 1/4-in 15.9-31.8mm Outerside diameter,inclusive,with minimum wall thickness equal to or greater than 0.045inch (1.1mm) Order Information: OD: 5/8’’- 1 1/4” (15.9-31.8mm) WT: ≥ 0.045’’ 1.1mm OD Tolerance : 0,+20% ...
溶接の平野はASTM A53 ERWの炭素鋼の管を終える
ASTM A53 ERW Carbon Steel Tubes Product Description: ASTM A53 pipe covers Seamless and Welded, Black and Hot-Dipped Galvanized nominal (average) wall pipe for coiling, bending, flanging and other special purposes and is suitable for welding. Continuous-Welded pipe is not intended for flanging. ...
JIS G3455 STS370のボイラーのための継ぎ目が無い炭素鋼の管の管
JIS G3455 STS370 Seamless Carbon Steel Tube Pipes for Boiler Applications: for High-Presure Service Size range: O.D.:5-420mm W.T.:0.5-50mm L: according to customer's requirement (Max12m) Chemical Composition Designation of Grade C Si Mn P S STS370 0.25 max. 0.10 to 0.35 0.30 to 1.10 0.035 max. 0.035 ...
ASTM A53 TORICHの継ぎ目が無い炭素鋼の管
ASTM A53 Seamless Carbon Steel Tubing For High Temperature Service Standard: ASTM A53 Seamless Cold Worked/ Hot Rolled Steel Tubes Applications: For High Temperature Service Production Method: Seamless Cold Worked/ Hot Rolled WT Tolerance: +/-0.15mm Delivery Condition: +Cc +LCc +SR +Ad +N NBK Size: ...
GOST 3262-75の給水の炭素鋼の管
GOST 3262-75 Water Supply Carbon Steel Tube Standard: GOST 3262-75 Steel Grade: 08kp, 08ps, 10, 15, 15kp, 15ps, 20, 20kp, 20ps, St1sp, St1ps, St2sp, St2ps, St3kp, St3ps, St3sp, etc. Size Range: Outside Diameter: 17 - 114 mm Wall Thickness: light: 2 – 4 mm; medium: 2,2 – 4,5; heavy: 4,5 – 5 mm. The ...
JIS G3455の高圧サービスのための継ぎ目が無い炭素鋼の管
JIS G3455 Seamless carbon steel tube for high pressure service Applications: For high pressure service Technique: Hot worked Alloy or not: Non-Alloy Secondary or not: Non-Secondary Steel Grade/Steel Material: STS370 STS410 STS480 Size: OD 5-420mm WT 0.5-50mm Length 12000mm max Characteristic: Good ...
