cold drawn steel pipe
"
EN 10305-1 E355 St45 St30の低炭素の冷たい-引き分けの明るいアニールされた継ぎ目が無い精密鋼鉄管
EN 10305-1 E355 St45 St30 Low Carbon Cold Drawn Bright Annealed Seamless Precision Steel Tubes Torich has experiences of production seamless precision tube for over 20 years, can support customers with various material like E215 E235 E355 St30Si St 30Al St35 St45 St 52 STKM 11 STC38 STKM 13 STKM 19 etc.As precision seamless steel pipe has good tolerance on OD and WT,can used in Automotive application . Size range: O.D.:6-420mm W.T.:1-50mm L:max12000mm Production: Cold Drawn +
GB/T 8162 25MnCr6 構造用高強度低合金継目無鋼管
GB/T 8162 25MnCr6 High-Strength Low-Alloy Seamless Pipe for Structural Use Material Introduction The “GB/T 8162 25MnCr6” refers to a seamless steel tube designated under the Chinese national standard GB/T 8162 (for structural use) that is made from a low-alloy, high-strength steel with nominal chemical designation “25MnCr6.” The alloying with Mn (manganese) and Cr (chromium) (and possibly additional trace elements) is intended to provide enhanced strength, toughness, and
自動車部品用冷間引抜き410グレードマルテンサイト系ステンレス鋼シームレスパイプ
410 Stainless Steel Seamless Pipe (Martensitic) for Automotive Parts Material Overview 410 is a basic martensitic stainless steel (≈12% Cr class) designed for applications that need higher strength, wear resistance, and moderate corrosion resistance compared with carbon steels. It is commonly supplied annealed or quenched & tempered to reach targeted hardness/strength levels for machined automotive components. Specifications Product type: Martensitic stainless steel seamless
E235N 自動車用高精度水力シームレス冷引管 表面粗さRa ≤ 4μm
E235N Carbon Steel Precision Tube Hydraulic Seamless Cold Drawn Tube for Automotive Material For technical data, this product title is best matched to EN 10305-4 grade E235 in delivery condition +N. It is a seamless cold-drawn precision carbon steel tube for hydraulic and pneumatic power systems, with precisely defined tolerances and specified surface roughness. The EN 10305 tube family is also widely used in vehicle and general engineering applications. Specification
溶接された精密鋼鉄管EN10305-2 +C +LC +SR +A +Nの精密鋼管
Welded Precision Steel Tubes EN10305-2 +C +LC +SR +A +N Precision Steel Pipe EN10305-2 E155,E195,E235,E275,E355 +C +LC +SR +A +N Cold Drawn Welded Precision Steel Tubes, is produced by cold drawing over mandrel and die on the ERW welded steel tube, to achieve better tolerance and good concentricity, both outside and inside weld seam is completely removed during the cold drawing process. Production Process: Cold rolling by Cold pilger machine and Cold rolling machine Cold
流動管のためのGB/T8162 Q235 Q345 Q195カーボン継ぎ目が無い鋼管
GB/T8162 Q235 Carbon Seamless Steel Pipe GB/T8162 Q235 Carbon Seamless Steel Pipe Steel Grade/Steel Material: Q345 Q195 10# 20# Steel pipe standard:GB/8162 Characteristic: Good concentricity Good OD and ID tolerance High Precision Stable quality Smooth Roughness TORICH QUALITY ASSURANCE Production Processs: RAW MATERIAL ↓ INCOMING INSPECTION ↓ STORAGE → CUTTING→HAMMERING → PICKING LUBRICATION → CLEANING → PHOSPHORI CLEAN ↓ ENDS CUTTING←STRAIGHTENING←HEAT TREATMENT↔MIDDLLE
冷たいGB/T 24187 -コンデンサーの蒸化器のための引き分けの精密単一の溶接された鋼鉄管
GB/T 24187 Cold-drawn precision single welded steel tubes Application:It is suitable for cold drawn precision single-layer welded steel pipes used in the production of condensers, evaporators, fuel pipes, lubricating oil pipes, electric heat pipes, cooler pipes, and general pipes in refrigeration, automotive, electric heating and other industries. Size:L--1.4-4000m WT--0.3-1.3mm OD--3.18-18mm Plating method for outside plating of steel pipe:Electroplating, electroless plating
カスタマイズされた表面の重い壁の鋼鉄管の継ぎ目が無い風邪-引出されたタイプOD 5-120mm
Customized Surface Heavy Wall Steel Tubing Seamless Cold Drawn Type OD 5-120mm Customized Surface Heavy Wall Steel Tubing Seamless Cold Drawn Type OD 5-120mm Material: Carbon and Alloy Steel, ferritic steel Grade 1A, Grade3, Grade 4, Grade 6A, Grade 7A Manufacture: The pipes are made by seamless and welding process with the addition of no filler metal in the welding operation. Grade 4 is manufactured by seamless process Heat treatment: All seamless and welded pipes, other
冷たい- Aisi 4130の鋼鉄等級が付いている引かれた合金の継ぎ目が無い鋼鉄管1 - 12m
Cold Drawn Alloy Seamless Steel Pipe with AISI 4130 Steel Grade ASTM A519 SEAMLESS STEEL TUBES, by DOM production, with the steel grade of SAE4140 and SAE4130, other alloy steel grade upon customer's agreement.: SAE4130: C: 0.28-0.33% Mn: 0.40-0.60% P max 0.40% S max 0.40% Si: 0.15-0.35% Cr: 0.80-1.10% Mo: 0.15-0.25% SAE4140: C: 0.38-0.43% Mn: 0.75-1.00% P max 0.40% S max 0.40% Si: 0.15-0.35% Cr: 0.80-1.10% Mo: 0.15-0.25% Annealed AISI4130 AISI4140 Cold Drawn Alloy Steel
