cold drawn seamless tube
"
GOST 4543 45X 合金無縫鋼管 合金構造炭素鋼管 建築用
GOST 4543 15X 15XA 20X 30X 30XPA Alloy Seamless Steel Pipe Alloy Structural Carbon Steel Pipe for Architecture In the field of architecture, the choice of materials plays a crucial role in ensuring the durability and strength of structures. One such material that has gained significant popularity is the GOST 4543 alloy seamless steel pipe. This article will delve into the material, its specifications, key features, chemical composition, mechanical properties, steel grades,
EN 10208-1 L360GA 熱巻き合金鋼のシームレスパイプ
EN 10208-1 L210GA L235GA L245GA 1290GA L360GA Alloy Steel Pipe Hot Rolling Seamless Steel Pipe For Combustible Fluids Introduction The EN 10208-1 standard specifies the requirements for hot rolling seamless steel pipes made of alloy steel. These pipes are specifically designed for use with combustible fluids. The standard covers various grades of alloy steel pipes, including L210GA, L235GA, L245GA, 1290GA, and L360GA. This article will provide an overview of the material,
高熱伝送効率と耐腐蝕性のために,L足形にカラーされたKLフィンチューブ
KL Fin Tube (KL Type Knurled L-Footed Finned Tube for Heat Exchangers) Material / Product Description KL fin tube (KL type knurled L-footed finned tube) is a wrap-around finned tube where an L-shaped fin strip is helically wound onto a pre-knurled base tube. The knurling and L-foot create a tight mechanical interlock and a large metal-to-metal contact area, improving heat transfer efficiency and fin bond stability compared with standard L or LL fins. Typical base tube
双方のひれが付いている塗られたライフルの継ぎ目が無い炭素鋼の管
Painted Rifle Seamless Carbon Steel Pipe With Fin On Two Sides Seamless Rifle Steel Tube, it is made by Carbon and Alloy Steel, produced by cold drawn, Rifle Tubes are used in Boilers and Super Heaters etc, for better heating efficiency. Product information: Material: SAE1010 , SAE1020 , SAE1035 , SAE1045 , ST37.0 , ST44 , ST52 , E235 , E355 Grade: BS, JIS, GB, DIN, ASTM, API, Shape: Omega Wall thickness: 0.5-50mm Length: up to 12m, or according to customer's requirement.
低く、中型圧力ボイラーのためのGB/T3087 Q235カーボン継ぎ目が無い鋼管
GB/T3087 Q235 Carbon Seamless Steel Pipe For Low And Medium Pressure Boiler Steel Grade/Steel Material:Q345 Q195 10# 20# Steel pipe standard:GB/T3087 Characteristic: Good concentricity Good OD and ID tolerance High Precision Stable quality Smooth Roughness TORICH QUALITY ASSURANCE Size Range: OD:4-1200mm WT:0.5-200mm Length: 5.8m, 6m, 11.8m, 12m, or as required. Production Processs: RAW MATERIAL ↓ INCOMING INSPECTION ↓ STORAGE → CUTTING→HAMMERING → PICKING LUBRICATION →
ライフルの鋼鉄管の継ぎ目が無い鋼鉄管の中のGB/T20409 20G 20MnG 25MnG SA210 SA213の精密
Product Name:TORICH GB/T20409 20G 20MnG 25MnG SA210 SA213 Multi-rifled High-pressure Boiler Seamless Steel Tubes Standard: GB/T20409 OD: 3-420mm WT: 0.5-50mm Length: 8-12m or according to customers' actual application and production. Application:High-pressure Boiler Steel Grade:20G 20MnG 25MnG SA210 SA213 Technology:Hot rolled,cold rolled,cold drawn Characteristic: Good concentricity Good surface quality Good OD and ID tolerance High Precision Stable quality Smooth Roughness
低温サービス配管のためのTORICH GB/T 18984の継ぎ目が無い鋼鉄管
TORICH GB/T 18984 Seamless Steel Tubes For Low-Temperature-Service Piping Application:For Low-Temperature-Service Piping Material:16MnDG,10MnDG,09DG,09Mn2VDG,06Ni3MoDGUnit:mmHot Roll(Extrusion,Expansion)Steel TubeCold Drawn(Roll) Steel TubeDiamensionToleranceDiamensionToleranceOrdinary Level PAHigh Level PCOrdinary Level PAHigh Level PCNominal Outer DiameterD＜76.1±1.25%D±0.60Nominal Outer DiameterD＜12.7±0.30±0.1076.1~＜139.7±0.8012.7~＜38.1±0.30±0.15139.7~＜273.1±1.5%D±1.2038.1~
Torichの液体/ガスの交通機関Gb/t8163のための継ぎ目が無いステンレス鋼の管
GB/T8163 Seamless Steel Pipes For Liquid/Gas Transportation gas pipe Steel Grade/Steel Material/Steel Number: 10# 20# Q295 Q345 Q390 Q420 Q460 Size Range: OD: 5-220mm WT:1-30mm Length:1-12m,as customer’s requirement Characteristic: Good Surface Quality Good OD and ID tolerance controlled to Technical Standard Stable quality 100% Eddy Current Test TORICH QUALITY ASSURANCE Production Process: Seamless Cold Drawn or Seamless Cold Rolled + Heat Treatment of Annealing or
Q235 / Q345農業のMachineriesのための特別な三角形の形PTOの管DIN 2391
Products Description TORICH DIN 2391 Q235 / Q345 Engineering Special Triangle Shape PTO Tube For Algricultural Machineries Standard DIN 2391 Size OD: 15-80mm, WT: 1 - 14 mm, Length: 1-9m or cutting as you require Material 16Mn, 10#, 45#, Q235, Q345, Q195, 20# Hardness HB170-217 Application These pipes are mainly used for agricultural machine PTO shaft Tolerance: we can control it within OD/Thickness +/-0.1mm Quality inspection: 1.Heat pipes inspection:to measure the outer
