thick wall steel tube
"
A369/A369M FPA、FPB、FP1、FP2 カーボンおよびフェライトの継ぎ目が無い合金鋼管
A369/A369M FPA , FPB , FP1 , FP2 Carbon and Ferritic Alloy Steel Forged and Bored Pipe Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service Testing: Additional Tension Test Additional Flattening or Bend Tests Ultrasonic Tests Hydrostatic Test Metal Structure and Etching Tests TABLE 1 Chemical Requirements Grade Composition FPA FPB FP1 FP2 Carbon 0.25max 0.25max 0.10-0.20 0.10-0.20 Manganese 0.27-0.93 0.29-1.06 0.30-0.80 0.30-0.61 Phosphorus,max 0
ASTM A106 グレードA 高温サービス用熱巻きシームレス炭素鋼管
ASTM A106 Grade A Hot Rolled Seamless Carbon Steel Pipe For High-Temperature Service Introduction ASTM A106 Grade A is a specification for seamless carbon steel pipe designed for high-temperature service. It is commonly used in refineries and plants to transport gases and fluids at elevated temperatures and pressures. This article provides an overview of the material, specification, key features, chemical composition, mechanical properties, steel grade, application, and
ASTM A789 UNS S31803 デュプレックスステンレス鋼管 WT 0.5mm-80mm
ASTM A789 UNS S31803 Duplex Stainless Steel Pipe Chemical composition of S31803 duplex stainless steel tube C Si Mn P S Ni Cr Mo N ≤0.03 ≤1.00 ≤2.00 ≤0.03 ≤0.02 4.5-6.5 21.0-23.0 2.5-3.5 0.08-0.20 Diameter 6mm~860mm Wall Thickness 0.5mm~80mm Length Any length between 1~15 meters, will be customized Standard ASME SA213, A312, A269, A688, A789, A790, EN 10216-5 etc. Surface Pickled surface, or bright annealed surface, will be customized Other Materials 304, 304L, 316, 316L, 317
ステンレス鋼は継ぎ目が無い管304 /316GB/T 14975、ASTM A269/A269Mを冷間圧延しました
Cold rolled Seamless Stainless Steel Tubes 304 /316 Standard: GB/T 14975, ASTM A269 / A269M, ASTM A511 / A511 M Material: S30408 S30403 304 304L TP304 TP304L 316 316L TP316 TP316L 12Cr18Ni9, 06Cr19Ni10, 022Cr19Ni10, 06Cr19Ni10N, 06Cr19Ni9NbN, 022Cr19Ni10N, 06Cr23Ni13, 06Cr25Ni20, 015Cr20Ni18Mo6CuN, 06Cr17Ni12Mo2, 022Cr17Ni12Mo2 Cold rolled Seamless Stainless Steel Tubes 304 /316 The Tolerance of Nominal Outer Diameter and Wall Thickness Unit:mm Cold Drawn(Roll) Steel Tube
ASTM A179 低炭素鋼のU曲線チューブ
ASTM A179 U-Bend Tube — Cold-Drawn Seamless Low-Carbon Steel Tubing for Heat Exchangers Material ASTM A179 U-bend tubes are seamless, cold-drawn low-carbon steel tubes that are formed into a U-shape for shell-and-tube heat exchangers, condensers, coolers, and similar heat-transfer equipment. The base tube is produced by the seamless process and cold drawing, then bent to the required radius/leg length with strict control of dimensional stability and surface condition.
ASTM B407の熱交換器のためのニッケル・鉄クロムの合金の継ぎ目が無い管
ASTM B407 UNS N08800 Nickel-Iron-Chromium Alloy Seamless Pipe for Heat Exchanger and Condenser TORICH is a Professional Manufacturer of ASTM A511 MT304 Seamless Steel, which is for Nickel-Iron-Chromium Alloy Steel Tubing for General Service We can manacture stainless steel tubes based on the following technical standard: ASTM A213,ASTM A312,ASTM A511,ASTM A269,ASTM A249,ASTM A358 The Stainless Steel Grade can cover the following: ASTM A213 TP304 TP304L TP304H TP310S TP316
SA192 冷引縫いのない炭素鋼管 OD38mm ボイラー用
SA192 OD38mm Cold Drawn Seamless Carbon Steel Omega Tube for Boiler Special Steels Seamless Omega Tube, it is made by Carbon and Alloy Steel, produced by extrusion and cold drawn, the Omega Tubes are used in Boilers and Super Heaters etc, for better heating efficiency. Product information: Material: SAE1010 , SAE1020 , SAE1035 , SAE1045 , ST37.0 , ST44 , ST52 , E235 , E355 Grade: BS, JIS, GB, DIN, ASTM, API, Shape: Omega Wall thickness: 0.5-50mm Length: up to 12m, or
カーボン圧力機械類のためのオメガの特別な形の継ぎ目が無い鋼管
Cold Drawn Seamless Carbon Steel Special Shape Omega Tube for Boiler Special Steels Seamless Omega Tube, it is made by Carbon and Alloy Steel, produced by extrusion and cold drawn, the Omega Tubes are used in Boilers and Super Heaters etc, for better heating efficiency. Product information: Material: SAE1010 , SAE1020 , SAE1035 , SAE1045 , ST37.0 , ST44 , ST52 , E235 , E355 Grade: BS, JIS, GB, DIN, ASTM, API, Shape: Omega Wall thickness: 0.5-50mm Length: up to 12m, or
非ボイラーのための継ぎ目が無い炭素鋼のオメガの管材料20#を合金にして下さい
Non Alloy Seamless Carbon Omega Steel Pipe Material 20# For Boiler Special Steels Seamless Omega Tube, it is made by Carbon and Alloy Steel, produced by extrusion and cold drawn, the Omega Tubes are used in Boilers and Super Heaters etc, for better heating efficiency. Product information: Material: SAE1010 , SAE1020 , SAE1035 , SAE1045 , ST37.0 , ST44 , ST52 , E235 , E355 Grade: BS, JIS, GB, DIN, ASTM, API, Shape: Omega Wall thickness: 0.5-50mm Length: up to 12m, or according
