precision pipes and tubes
"
習慣5.8m/6m 10# 20# 45# 12CrMoの継ぎ目が無い鋼鉄管GB6479
GB6479 Seamless Steel Tubes For High Pressure Chemical Fertilizer Equipments Seamless Steel Tubes Steel Grade/Steel Material:10#, 20#, 45#, 12CrMo Steel pipe standard:GB6479 size: OD:10.00—700mm WT:1.00—60mm Length: 5.8m, 6m,or as required. Production Processs: RAW MATERIAL ↓ INCOMING INSPECTION ↓ STORAGE → CUTTING→HAMMERING → PICKING LUBRICATION → CLEANING → PHOSPHORI CLEAN ↓ ENDS CUTTING←STRAIGHTENING←HEAT TREATMENT↔MIDDLLE CHECK↔ COLD DRAWING ← LUBRICATING ↓ FINAL
GB/T 3090のSU 304/316の継ぎ目が無い鋼鉄管の小さい直径の鋼鉄管
GB/T 3090 SUS 304/316 ASTM 304/316/321 EN 1.4301/1.4541/1 Austenitic Stainless Small Diameter Seamless Steel Tubes QUALITY CONTROL 1~ Incoming Raw Material Inspection 2~ Raw Material Segregation to avoid steel grade mix-up 3~ Heating and Hammering End for Cold Drawing 4~ Cold Drawing and Cold Rolling, on line inspection 5~ Heat Treatment, +A, +SRA, +LC, +N, Q+T 6~ Straightening-Cutting to specified length-Finished Measuring Inspection 7~ Machanical Testing in own labs with
ASTM A269 316の304風邪-引かれた継ぎ目が無いステンレス鋼は流動輸送12Cr18Ni9のために配管します
ASTM A269 316 304 Cold drawn Seamless stainless steel pipes for fluid transport 12Cr18Ni9 Application:Fluid transport size:L--10-12m OD--6-219mm WT--2-50mm steel grade:12Cr18Ni9,06Cr19Ni10 ,022Cr19Ni10,06Cr19Ni10N,06Cr19Ni9NbN,022Cr19Ni10N,06Cr23Ni13,06Cr25Ni20,06Cr17Ni12Mo2,022Cr17Ni12Mo2,07Cr17Ni12Mo2,06Cr17Ni12Mo2Ti Manufacture method:Hot rolling (squeezing, expanding) or cold drawing (rolling) Delivery State:Heat treatment and pickling The Tolerance of Outer Diameter and
高圧給水のヒーターのためのASME SA-556Mの継ぎ目が無い鋼鉄管
ASME SA-556M Seamless steel tubes for high pressure feedwater heater Applicatition:Straight pipe and U-shaped seamless pipe for high-pressure feedwater heater Size:OD--12-32mm WT--1.5-4mm Length--2-15m The tolerance of outer diameter unit:mm D Tolerance D＜25 ±0.10 D≥25 ±0.15 The tolerance of the length of the U-tube straight pipe unit:mm the length of the straight pipe Tolerance L≤6000 +3.2 0 6000＜L≤9000 +4.0 0 9000＜L≤15000 +4.8 0 The steel grade and chemical component No.
冷たい-地質訓練/鉱山のための引かれた継ぎ目が無いドリル管4000 - 12500mm
Cold Drawn Seamless Drill Pipe for Geological Drilling&Mining,GB/T 9808-2008, JIS G3465-2006,TORICH Cold Drawn Seamless Drill Pipe for Geological Drilling&Mining,GB/T 9808-2008, JIS G3465-2006,TORICH Standard: GB/T 9808-2008 Application: for wire-line drill rods,core barrel tubes,drill rods coupling and casing Size range: OD:5-420mm WT:0.5-50mm Length:max12000mm Normal sizes Wire-line drill rods Core Barrel Tubes Casing Coupling 43.5*4.75 31*2 45*4.5 46*6.5 53*4.5 41*2 54*4.5
油をさされた表面Gb/t8162が付いている構造カーボン継ぎ目が無い鋼鉄管1 - 12m
GB/T8162 Structure Carbon Seamless Steel Pipes Steel Grade/Steel Material/Steel Number: 10# 15# 20# 25# 35# 45# 20Mn 25Mn Q235 Q275 Q295 Q345 Q390 Q420 Q460 40Mn2 45Mn2 27SiMn 30Cr 35Cr 40Cr 45Cr 50Cr 38CrSi 12CrMo 15CrMo 35CrMo 42CrMo 12CrMoV Size Range: OD: 5-220mm WT:0.5-30mm Length:1-12m,as customer’s requirement Characteristic: Good Surface Quality Good OD and ID tolerance controlled to Technical Standard Stable quality 100% Eddy Current Test TORICH QUALITY ASSURANCE
Astm A106の継ぎ目が無い金属の管5 - 420mm ODオイル シリンダー管の磨かれた表面
Din 2391-1 En10305-1 Din2448 St37 St52 5cm Diameter Seamless Steel Pipe Tube Astm A106 Introduction: Product name Seamless steel pipe OD 5-420mm WT 0.5-50mm Standard ASTM A 106, EN 10303-1, DIN2391, DIN2448 Grade St37,st52 Usage Auto industry, machinery use, oil cylinder tube, motorcyle shock absorber Shape Round Section shape Round Surface treatment Polished Payment L/C,T/T,Western Union,Money Gram Terms of delivery FOB,CIF,CFR,CPT,etc
最高の12mの長さの丸型の継ぎ目が無い鋼鉄管のステンレス鋼の管
TORICH 42MM Diameter 60MM Stainless 48 inch Steel Torich is a manufacturer and trader for Annealed and Pickled Thin Wall Stainless Steel Tubing, with grade TP304/304L, TP316/316L, the products are exported to over 30 countries worldwide. 321 stainless steel Size:ANSI /ASME size is under,other standard of size is for ready choice O.D.:4.0-50mm W.T.:0.5-12mm Length:Max.12 Meter NPS 1/8'-48' Schedule:5/5S,10/10S,20/20S,40/40S,80/80S,120/120S,160/160S according to ANSI B36.19/36
機械管のステンレス鋼材料0.5 - 420mm ODのあたりでアニールされる明るい
TORICH D4 / T3 Bright Annealed Stainless Steel capillary Tubes for Food Industry Standard:ASTM A213 ASTM A269 EN10216-5 TC-1 NDT: Eddy Current or Hydraulic Test or UT Tolerance: D4/T3 Heat treatment: Bright Annealed Quality Assurance: ISO 9001&PED 97/23/EC certificated with 100% traceability on all instrument tubes and material test reports(EN 10204/3.1B)accompany every shipment upon request. Why choose bright annealed tube? 1. Superior Surface Finish The traditional
